Step5: Add new bases to DM. There two methods to connect new base to DM.
Method1: Add base from DM
If the new base is in the same broadcast network with DM, please go to DM’s management page—
Base Station Registration –find the base and click on Register. If connect successfully, you will see it
on the registered list.
Method 2: Connect to DM from Base
If the new base is not in the same broadcast network with DM, please get the IP address of the base,
go to management page and then enter the IP address of DM. Then you will also see the base on
registered list. This method is very useful when you are building a small system and it is only
supported on Yealink MC product.
