Call Features
45
Call Features
You can place a call, answer a call, transfer a call, etc. on Yealink IP phone.
Topics
Switching Among the Receiver, Handsfree and Headset Modes
Changing the Default Outgoing Line
Silencing or Rejecting Incoming Calls
Switching Among the Receiver, Handsfree and Headset
Modes
You can place a call using the following call modes:
l
Receiver mode—pressing the Off-hook key to dial out.
l
Earpiece mode—pressing the Speakerphone key to dial out.
l
Headset mode—connecting a standard 3.5mm headset.
Changing the Default Outgoing Line
Your system administrator can assign one or more outgoing lines for the handset. Only the outgoing line(s) assigned
by your system administrator can be used to place calls.
When multiple outgoing lines are assigned to the handset, the first one will be the default outgoing line. You can
change the default outgoing line of the handset.
Procedure
1.
Navigate to
OK
->
Settings
->
Telephony
->
Default Line
.
The phone displays all the assigned outgoing lines. The default outgoing line is highlighted and followed by a left
arrow.
2.
Highlight the desired line, and then press
OK
.
The default outgoing line is changed successfully.
Placing Calls
When the handset is registered to the base station successfully, you can use your handset to place an internal or
external call. One handset can handle a maximum of 2 calls at one time, and one call is active (the call that has audio
associated with it), while the other is placed on hold.
By default, the phone uses the default outgoing line to place a call.
Summary of Contents for W60P Telesystem
Page 1: ......
Page 12: ...12 Yealink W53P W60P User Guide...
Page 24: ...24 Yealink W53P W60P User Guide...
Page 60: ...60 Yealink W53P W60P User Guide...