Quick Reference Guide
Yealink W60P with W56P Handset
Advanced Call Handling
Blind Transfer (Unannounced)
Blind transfers pass through the caller ID of the originating caller to the third party.
• Press the TRAN button
• Input the destination extension or phone number
• Press the TRAN button
Transfer directly to an extension’s voicemail box by dialing *90 plus the extension as the destination
number.
Toledo, Ohio | Philadelphia, Pennsylvania | 1.888.808.6111 | www.telesystem.us
6.7.19
Available features may vary. Particular feature set is based on the original order and the system
administrator’s requests for each deployment. Please contact your system administrator or
Telesystem directly to discuss any additions to the system.
Basic Call Handling
Place a call
Input the phone number or extension then press the green Send button or Speakerphone button.
End a call
Press the red End button or soft key.
Answer a call
When phone is idle:
Press the green Send button, Accept soft key, or Speakerphone button.
While already on a phone call:
Use the navigational arrows to select the ringing call then press the green Send button, Accept soft key,
or Speakerphone button. The first call will go on hold automatically.
Speaker
Press the Speaker button to switch from handset to speaker phone audio.
Mute
Press the Mute button to turn mute on or off during a call.
Hold
To place a call on hold: Press Options soft key then use navigational buttons to select Hold.
To resume a held call: Press the Resume soft key.
To resume a held call if one held and one active call are on the phone:
Press the Swap soft key. Alternately, use navigational buttons to select the held call then press OK.
This will place the formerly active call on hold and resume the other.
Blue Platform
