4
Getting Started
Handset Registration
You can register up to 10 handsets to one W70B base station. Each handset
can be registered to 4 different base stations.
When the handset LCD screen prompts “Unregistered!”, long press on the
base station till the registration LED indicator flashes.
There are two methods to register a new handset:
Easy Registration:
1. Press the
Reg
soft key on the handset to register quickly.
Normal Registration:
1. Press the
OK
soft key on the handset, and then select
Register Handset
.
2. Select the desired base station and then press the
OK
soft key. The handset
begins searching the base station.
3. Press the
OK
soft key after searching a base station successfully.
4. Enter the base station PIN (default: 0000), and then press the
Done
soft key
to complete the registration.
To register to multiple base stations, press
OK
to enter the main menu, and
select
Settings
->
Registration
->
Register Handset
, then repeat steps 2-4.
Note
:
• Use Yealink-supplied power adapter (5V/0.6A). A third-party power adapter may damage the handset.
• Check the charging status on the top-right corner of the LCD screen.
Note
:
• If the handset is registered to the base station successfully, the handset LCD screen prompts
“Handset Subscribed” and “Base NO.”( the last 4 characters indicate the base station’s MAC
address).
• If the handset LCD screen prompts “Searching for Base”, check that your base station is
powered on.
