4
Guided Setup
Connect Cables
Please follow the diagram to install your phones. Once plugged in, the phone will
automatically download its configuration and start to work after a few minutes.
Connecting the Cordless Base:
1. Open the box and remove
the Cordless Base, Power
Adapter and Ethernet cable.
2. Connect one end of the Ethernet
cable to the Internet port on
the rear of the Base Station.
3. Connect the other end of the
Ethernet cable to any free port on
your existing router or anywhere
on your existing data network.
4. Connect the Base Station Power
Adapter to the ”DC 5V” connector on
the Base Station, and then plug the
Power Adapter into a power outlet.
Setting up the Cordless Handsets:
1. Open the box and remove the
Handset, Power Adapter, Batteries,
Belt Clip and Charging Cradle.
2. On the Handset, open the
battery cover and insert the
batteries in the correct order,
then close the battery cover.
3. Connect the Power Adapter to the
“DC 5V” connector on the Charging
Cradle and then plug the Power
Adapter into a power outlet.
4. Connect the optional Belt Clip
to the Handset if desired.
5. Place the Handset into
the Charging Cradle.
For optimal battery performance, please
charge the phone for 6 hours before using.
Once the phone has been plugged in and
operational, the voicemail box is functional
with a default greeting.
