Yealink VP59 Teams, Administrator'S Manual

Page: 382 / 533

Call Features
379
Default
1
[1]
X is the account ID. For VP59/T58A, X=1-16; for CP960, X=1.
Transfer Mode for Dsskey Configuration
The following table lists the parameter you can use to configure transfer mode for Dsskey.
Parameter transfer.dsskey_deal_type <y0000000000xx>.cfg
Description
It configures the transfer mode for the DSS key. When the user presses the DSS Key during a call, the
DSS Key behavior depends on the transfer mode.
Note: This feature is only applicable to the Speed Dial key, BLF/BLF List key or Transfer key with an
assigned value.
Permitted
Values
0-New Call
1-Attended Transfer
2-Blind Transfer
4-Optional, users can choose to transfer the call via New Call, Attended Transfer or Blind Transfer
manually (not applicable to phones)
Default 2
Web UI Features > Transfer > Transfer Mode via Dsskey
Conference
The Yealink phones support local conference and network conference.
Topics
Conference Type Configuration
Local Conference Configuration
Network Conference Configuration
Conference Type Configuration
You can specify which type of conference to establish.
The following table lists the parameter you can use to set a conference type.
Parameter account.X.conf_type
[1]
<MAC>.cfg
Description It configures the conference type for a specific account.
Permitted
Values
0-Local Conference
2-Network Conference
Default
0
Web UI Account > Advanced > Conference Type
[1]
X is the account ID. For VP59/T58A, X=1-16; for CP960, X=1.
Local Conference Configuration
The local conference requires a host phone to process the audio of all parties. Yealink phones support up to 5
parties (10 parties for T58A/VP59 phones) (including yourself) in a local conference call.