BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE
20-BD5561-00
©
2018 BROADSOFT INC.
PAGE 21 OF 117
Application
Server
Bob's Phone
Joe's Phone
Subscriber Bob's Profile
Configuration
Line/Port:/AoR 2405551111_1
Auth UserID: bobsmith
Auth Password: bobs
Subscriber Joe's Profile
Configuration
Line/Port:/AoR 2405552222_1
Auth UserID: joebrown
Auth Password: joeb
Shared Call Appearance
Configuration
Bob's 2nd Line
Line/Port:/AoR 2405551111_2
Shared Call Appearance
Configuration
Joe's 2nd Line
Line/Port:/AoR 2405552222_2
Bob's Line
Joe's Line
Figure 2 Shared Call Appearance Configuration
Figure 2
shows that Bob and Joe each have two lines and that Bob shares a line with Joe
and Joe shares a line with Bob. The figure also shows the applicable Subscriber Profile
and Shared Call Appearance Configuration data for subscribers Bob and Joe.
When Bob (2405551111) is called, Bob’s first line and Joe’s second line will ring. When
Joe (2405552222) is called, Joe’s first line and Bob’s second line will ring.
The following steps show how to configure both phones for this Shared Call Appearance
configuration.
For configurations of SCA for the device, see the example in the following section.
4.4.1.1 Bob’s Phone Configuration – MAC.cfg
This is the SCA configurations as specified in
MAC.cfg
, that is,
0015651130dc.cfg
where
“0015651130dc” is the MAC address of the SIP phone.
The following steps are used to configure line 1 for Bob’s phone. This line rings when Bob
is called, so it has Bob’s authentication information.
Step
Command
Purpose
Step 1
Configure line as shared.
account.1.shared_line = 1;
Configure the line as “shared”
(as opposed to “private”).
Step 2
Set Register User ID.
Example:
account.1.user_name = 2405551111_1;
The register user ID must
correspond with the line/port
setting on BroadWorks.
