Static
6
To configure the network parameters for the base station manually:
1.Press the
OK
key to enter the main menu, and then select
Settings
->
System
Settings
->
Network
(default PIN: 0000)->
Basic
.
3.Press to select the corresponding IP address mode.
2.Select the desired IP address mode from the
IP Mode
field.
4.Make the desired changes.
5.Press the
Save
soft key to accept the change.
Turning Handset On/Off
To turn the handset on, do one of the following:
Place the handset in the charger cradle. The handset will be turned on automatically.
To turn the handset off:
Locking/Unlocking Keypad
Silent Mode
Press , then the LCD screen lights up.
Long press to turn the handset off.
Long press when the handset is idle to switch the silent mode to On.
Long press when the handset is idle to lock the keypad.
Long press again to switch the silent mode to Off.
Long press again to unlock the keypad.
Note:
The IP DECT phone supports either or both IPv4 and IPv6 addresses modes, but IPv6
is disabled by default.
Wrong network settings may result in inaccessibility of your DECT phone may affect
the network performance. Contact your system administrator for the network
parameters.
Basic Operations
If the base station cannot contact a DHCP server for any reason, you need to configure
the IP address, subnet mask, gateway address, primary DNS address and secondary
DNS address for the base station manually.
