Yealink VC110, User Manual

Page: 34 / 159

User Guide for Yealink VC110 Video Conferencing Endpoint
22
LED Status Description
Off Other status.
Mute indicator LED on the VCM60 video conferencing wireless microphone:
LED Status Description
Fast flashing green The VCM60 is searching the dongle.
Green and in breathing
state The VCM60 registers with the dongle, and then enters
the online standby mode.
Solid green
The VC110 is placing a call.
The VC110 is in a call.
Solid red The VC110 is muted during a call.
Fast flashing orange The VCM60 enters registration mode.
Slowly flashing orange
The VCM60 fails to search the dongle, and then enters
the offline standby mode.
Off
The VCM60 is turned off.
The VCM60 runs out of battery.
Mute Indicator LED on the VCM30 video conferencing microphone array:
LED Status Description
Solid red The VCM30 is muted when the VC110 is during a call.
Flashing red The VC110 is ringing.
Solid green
The VCM30 is connected to the cable hub within the
first 5 seconds.
The VC110 is placing a call.
The VCM30 is unmuted when the VC110 is during a
call.
Off
The VCM30 is not connected to the cable hub.
The VCM30 is idle.
There are two ways to customize the configurations of your VC110 video conferencing
endpoint:

Remote Control

Web User Interface
Note
The display device and remote control constitute the endpoint user interface. This allows
the user to execute all call operation tasks and basic configuration changes directly.
Detailed operational steps will be explained in the feature section.