Yealink VC110, User Manual

Page: 40 / 159

User Guide for Yealink VC110 Video Conferencing Endpoint
28
Do the following:
1. Locate the DVI port on the back of the VC110 all-in-one unit, and connect it to the
DVI port of the cable hub with the supplied DVI cable.
2. Locate the Display1 port of the VC110 all-in-one unit, and connect it to the HDMI port
on the display device with the supplied HDMI cable (Make sure the display device
is powered on).
3. Locate the Internet port on the cable hub, and connect it to the port on the in-line
power switch/hub with the supplied 2m Ethernet cable.
4. (Optional.) Locate the Audio In port of the cable hub, do one of the following:
- Connect it to the Audio Out port on the video conferencing phone with the 7.5m
Ethernet cable that labeled Audio In, and then connect the free end of the
expansion microphone cables to MIC ports on the video conferencing phone.
- Connect it to the Audio Out port of the VCM30 video conferencing microphone
array with the 7.5m Ethernet cable labeled Audio In.
5. (Optional.) Locate the PC port of the PC port of cable hub and connect it to the
VGA output port on the PC with the supplied VGA cable for sharing content.