background image

Yealink TR-069 Technote 

3

 

Parameter 

Description 

Valid Value  Default Value 

requests. 

managementser
ver.periodic_info
rm_enable 

Enables or disables the 
phone to report its 
configuration 
information to the ACS. 

Boolean 

managementser
ver.periodic_info
rm_interval 

Sets the interval (in 
seconds) to report its 
configuration 
information to the ACS. 

Integer 

60 

2.

 

Store the configuration files to the root directory of the configuration server. 

The following is an example of configuring VPN in the configuration file: 

managementserver.enable = 1 

managementserver.username = user123 

managementserver.password = test123 

managementserver.url = http://10.3.2.125:8080/acsm 

managementserver.connection_request_username = phoneuser 

managementserver.connection_request_password = connection 

managementserver.periodic_inform_enable = 1 

managementserver.periodic_inform_interval = 120 

To configure TR-069 via web user interface: 

1.

 

Log in the web user interface with the administrator privilege. 

2.

 

Click on Settings->TR069. 

3.

 

Configure the parameters in the corresponding fields. 

 

Summary of Contents for TR-069








Reviews: