Yealink T5 Series, Administrator'S Manual

Page: 50 / 472

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
44
Parameter static.network.vlan.pc_port_mode
[1]
<y0000000000xx>.cfg
Description
It configures how the phone processes packets for the PC port when VLAN is enabled on the PC port.
Note : It is not applicable to CP960 phones.
Permitted
Values
0 -The phone forwards the packets sent from the PC port to the Internet port directly.
1 -If there are no VLAN tags in the packets sent from the PC port to the Internet port, the phone tags the
packets and then forward them; else, the phone forwards the packets directly.
Default 1
[1]
If you change this parameter, the phone will reboot to make the change take effect.
VPN
Yealink phones use OpenVPN to achieve VPN feature. To prevent disclosure of private information, tunnel endpoints
must authenticate each other before secure VPN tunnel is established. After you configure VPN feature on the IP
phone, the phone will act as a VPN client and use the certificates to authenticate with the VPN server.
For more information, refer to OpenVPN Feature on Yealink phones .
Topics
VPN Related Files
VPN Configuration
VPN Related Files
To use VPN, you should collect the VPN-related files into one archive file in .tar format and then upload this tar file.
The VPN-related files include certificates (ca.crt and client.crt), key (client.key) and the configuration file (vpn.cnf) of
the VPN client.
The following table lists the unified directories of the OpenVPN certificates and key in the configuration file (vpn.cnf)
for Yealink phones:
VPN Files Description Unified Directories
ca.crt CA certificate /config/openvpn/keys/ca.crt
client.crt Client certificate /config/openvpn/keys/client.crt
client.key Private key of the client /config/openvpn/keys/client.key
VPN Configuration
The following table lists the parameters you can use to configure VPN.
Parameter
static.network.vpn_enable
[1]
<y0000000000xx>.cfg
Description It enables or disables the OpenVPN feature.
Permitted
Values
0 -Disabled
1 -Enabled
Default 0
Web UI Network->Advanced->VPN->Active