Yealink T5 Series, Administrator'S Manual

Page: 217 / 472

Call Features
211
Default Blank
Web UI Settings->Dial Plan->Area Code->Code
Parameter dialplan.area_code.min_len <y0000000000xx>.cfg
Description
It configures the minimum length of the entered number.
Note : It works only if “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Permitted
Values
Integer from 1 to 15
Default 1
Web UI Settings->Dial Plan->Area Code->Min Length (1-15)
Parameter dialplan.area_code.max_len <y0000000000xx>.cfg
Description
It configures the maximum length of the entered number.
Note : The value must be larger than the minimum length. It works only if “dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Permitted
Values
Integer from 1 to 15
Default 15
Web UI Settings->Dial Plan->Area Code->Max Length (1-15)
Parameter dialplan.area_code.line_id <y0000000000xx>.cfg
Description
It configures the desired line to apply the area code rule. The digit 0 stands for all lines. If it is left blank,
the area code rule will apply to all lines on the IP phone.
Note : Multiple line IDs are separated by commas. It works only if “dialplan.digitmap.enable” and “accoun-
t.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Permitted
Values
0 to 16 (for T58V/T58A/T56A)
0, 1 (for CP960)
Default Blank
Web UI Settings->Dial Plan->Area Code->Account
Block Out Configuration
The following table lists the parameters you can use to configure block out.
Parameter
dialplan.block_out.number.X
[1]
<y0000000000xx>.cfg
Description
It configures the block out numbers.
Example :
dialplan.block_out.number.1 = 4321
When you dial the number “4321” on your phone, the dialing will fail and the phone screen will prompt
"Forbidden Number".
Note : It works only if “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).