Yealink T46S Skype for Business, User Manual

Page: 212 / 234

User Guide for the T46S Skype for Business phone
198
Using an Analog Headset
Connecting a YHS32/YHS33 Headset
To connect a YHS32/YHS33 headset
1.
Simply insert the modular connector into the headset port on the back of your phone.
For the information on how to connect headset YHS32/YHS33, refer to the user guide on the
specific headset's support page on
Yealink Technical Support
.
Note
Activating the Headset Mode
After connecting a headset to your phone, you can activate the headset mode and use headset
when answering and placing calls.
To activate the headset mode:
1.
Press the HEADSET key on the phone.
The HEADSET key LED glows green.
When you press the line key or the
Answer
soft key to answer an incoming call, the call is
connected in headset mode automatically. For more information on using the headset to
answer a call, refer to
Answering Calls on page 91 .
With the handset on-hook, enter the desired number and press the
Call
soft key, the
phone will then place a call using the headset automatically. For more information on
using the headset to place a call, refer to
Placing Calls on page 88 .
Deactivating the Headset Mode
If you don’t want to use a headset when handling calls, you can deactivate the headset mode.
To deactivate the headset mode:
1.
Press the HEADSET key again on the phone.
The HEADSET key LED goes out.
Enabling the Headset Prior
You can use headset in priority when receiving or placing calls. This feature is especially useful
for permanent or full-time headset users. To use this feature, you need to enable headset prior
feature in advance.
To enable the headset prior:
1.
Click on
Features
->
General Information
.
If both a Bluetooth headset and an analog headset are connected, only the Bluetooth headset
can be used.