Press the
Hold
soft key during an active call.
To Resume the call, do one of the following:
•If there is only one call on hold, press the
Resume
soft key.
•If there is more thanone call on hold, select the desired call, and then press the
Resume
soft key.
Transferring a Call
You can transfer a call in the following ways:
Performing a Blind Transfer
1.Press or the
Trans
soft key during a call. The call is placed on hold.
2. Enter the number you want to transfer to.
3.Press or
B Trans
soft key.
Performing a Semi-Attended Transfer
1.Press or the
Trans
soft key
during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press the
Send
soft key.
3.Press or
Transfer
when you hear the ring-back tone.
Performing a Attended Transfer
1.Press or the
Trans
soft key
during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
the
Send
soft key.
3.Press or
Transfer
when the second party answers.
Initiating a Conference Call
1. Press the
Conf
soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the
Send
soft key.
3. Press the
Conf
soft key again when the second party answers. Three parties are now joined in the
conference.
Listening to Voice Mails
Message waiting indicator on the idle screen indicates that one or more voicemail messages are waiting at the
message center. The power indicator LED slowly flashes red.
To listen to voice mails:
1.Press or the
Connect
soft key.
2. Follow the voice prompts to listen to your voicemail messages.
Note: You can split the conference call into two individual calls by pressing the
Split
softkey
To use the speed dial key:
Press the speed dial key to dial out the preset number.
Holding and Resuming a Call
To Hold a call:
Summary of Contents for T31P
Page 1: ...T31P...
