background image

2/28/2019

Provision your Yealink T2 series IP Phone for 3CX v15

https://www.3cx.com/sip-phones/yealink-t20p-t22p-t26p-t28p/

1/5

How to configure Yealink T2 Series for 3CX

This guide applies to v15.5 only.

On this topic

Supported Models: Yealink T2 Series

End Of Life

Step 1: Upgrade to the Required firmware
Step 2: Factory Reset the IP Phone
Step 3: Provision the phone

Local LAN or SBC: Provision via Plug’n’Play
Remote phones: Provision via RPS server

Step 4: Extended Phone Configuration
Known Limitations

Supported Models: Yealink T2 Series

● Yealink T21P/E2
● Yealink T23P/G
● Yealink T27P
● Yealink T27G
● Yealink T29G

End Of Life

● Yealink T20P **See Limitations
● Yealink T21P **See Limitations
● Yealink T22P **See Limitations
● Yealink T26P **See Limitations
● Yealink T28P **See Limitations

Step 1: Upgrade to the Required firmware

Ensure that the phone is running on the required firmware by 3CX. In case the device needs manual updating
download the latest distributed required firmware by 3CX 

here

Read how to check what firmware the phones

are running on and how to upgrade them in this guide: 

How to manual upgrade Yealink IP phones

.

Reviews: