Call Features
376
Call Timeout Configuration
The following table lists the parameter you can use to configure call timeout.
Parameter phone_setting.ringback_timeout
<y0000000000xx>.cfg
Description
It configures the duration time (in seconds) in the ringback state.
If it is set to 180, the phone will cancel the dialing if the call is not answered after 180 seconds.
Permitted
Values
Integer from 1 to 3600
Default
180
Anonymous Call
Anonymous call allows the caller to conceal the identity information shown to the callee. The callee’s phone LCD
screen prompts an incoming call from anonymity.
Anonymous calls can be performed locally or on the server. When performing anonymous call on local, the phone
sends an INVITE request with a call source "
From: "Anonymous" sip:[email protected]”. If per-
forming Anonymous call on a specific server, you may need to configure anonymous call on code and off code to
activate and deactivate server-side anonymous call feature.
Topic
Anonymous Call Configuration
The following table lists the parameters you can use to configure the anonymous call.
Parameter account.X.anonymous_call
[1]
<MAC>.cfg
Description It triggers the anonymous call feature to on or off.
Permitted
Values
0-Off
1-On, the phone will block its identity from showing to the callee when placing a call. The callee’s
phone screen presents “Anonymous” instead of the caller’s identity.
Default
0
Web UI
Account > Basic > Local Anonymous
Phone UI
Menu > Features > Anonymous Call > Local Anonymous
Parameter account.X.send_anonymous_code
[1]
<MAC>.cfg
Description
It configures the phone to send anonymous on/off code to activate/deactivate the server-side anonym-
ous call feature for a specific account.
Permitted
Values
0-Off Code, the phone will send anonymous off code to the server when you deactivate the anonym-
ous call feature.
1-On Code, the phone will send anonymous on code to the server when you activate the anonymous
call feature.
Default
0
Web UI
Account > Basic > Send Anonymous Code
