Yealink SIP-T46S, User Manual

Page: 180 / 239

User Guide for the SIP-T46S IP Phone
170
7.
Click
Confirm
to accept the change.
Note
According to the response message from the server, the IP phone will automatically configure
the BLF List keys beginning from the first unused DSS key (The default order of BLF list keys
assigned automatically is Line Key->Ext Key. To customize the assignment order, contact your
system administrator.). Once any DSS key is seized, the IP phone will skip to configure the next
DSS key.
You can receive a visual or/and an audio alert (if enabled) on your phone when the monitored
user receives an incoming call. For more information, refer to
Configuring Visual and Audio Alert
for BLF Pickup on page 162 .
Note
Call Recording
The SIP-T46S IP phone supports local and server recording. If you insert a USB flash drive into
the USB port on your phone, you can record active calls on your phone. The recordings are
saved as *.wav files on your USB flash drive. You can also record active calls by pressing a record
key on the phone (refer to
Recording Using a Record Key ). The recordings are saved on the
server.
Note
The pickup code is used in the following order of preference:
BLF List Pickup Code (
Account
->
Advanced
)>Directed Call Pickup Code
(
Account
->
Advanced
)>Directed Call Pickup Code (
Features
->
Call Pickup
). If all of them are not
configured, pressing the BLF List key will directly call the monitored user when he/she receives an
incoming call. For more information on pickup code, refer to
Call Pickup on page 153 .
For more information on BLF List URI/BLF List Pickup Code/BLF List Barge In Code/BLF List
Retrieve Call Parked Code, contact your system administrator.
Before recording any call, especially those involving PSTN, it is necessary to know about the rules
and restrictions of any governing call-recording in the place you are in. It is also very important to
have the consent of the person you are calling before recording the conversation.