User Guide for the SIP-T40P IP Phone
88
Muting While Dialing
To mute the microphone while dialing:
1.
Press on the pre-dialing, dialing or calling screen.
The call is muted automatically when setting up successfully.
To un-mute the microphone while dialing:
1.
Press again on the pre-dialing, dialing or calling screen.
Note
Call Hold/Resume
You can place an active call on hold. Only one active call can be in progress at any time. Other
calls can be made and received while placing the original call on hold. When you place a call on
hold, your IP PBX may play music to the other party while waiting.
To place a call on hold:
1.
Press the
Hold
soft key during a call.
The line key LED flashes green. The LCD screen indicates that the call is on hold.
Note
To resume a held call:
1.
Press the
Resume
soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
-
Press or to switch between the calls, and then press the
Resume
soft key to
retrieve the desired call.
-
Press the corresponding line key to retrieve the call.
The phone will beep softly every 30 seconds to remind you that you still have a call on hold.
The
phone ignores engaged audio device (handset or headset) and switches to Speakerphone to play
the hold tone by default.
You can also mute the microphone when the IP phone is ringing.
Summary of Contents for SIP-T40P
Page 1: ......
Page 12: ......
Page 132: ...User Guide for the SIP T40P IP Phone 120...
Page 185: ...Appendix 173 Appendix B Menu Structure...
