User Guide for the SIP-T27G IP Phone
70
Headset Use
If you want to use a wired headset, physically connect your headset to the phone and activate
the headset mode for use. For more information on physically connecting a headset, refer to
If you want to use a wireless headset, insert the Bluetooth
USB dongle into the USB port at the
back of the IP phone. For more information on using a Bluetooth headset, refer to
on page
This section
provides an introduction to wired headset use.
Note
Headset Mode Activation/Deactivation
To activate the headset mode:
1.
Press on the phone.
The HEADSET key LED illuminates solid green.
Press the line key or the
Answer
soft key to answer an incoming call. The call will be
connected to your headset automatically.
Enter the desired number and then press the
Send
soft key, the phone will then place a call
using the headset automatically. For more information on using the headset to place a call,
refer to
To deactivate the headset mode:
1.
Press again on the phone.
The HEADSET key LED goes out.
Headset Prior
You can use headset in priority when headset prior feature is enabled. This feature is especially
useful for permanent or full-time headset users.
If both a Bluetooth headset and a wired headset are connected, only the Bluetooth headset can
be used.
To use headset, make sure the headset mode is enabled. Contact your system administrator for
more information.
