Yealink SIP-T27G, User Manual

Page: 139 / 222

Basic Call Features
129
group and search for the contact (Directory should be configured in advance. Refer to
Directory on page 50 for more information).
Press , or the
Send
soft key to dial out.
- Press the
Directory
soft key, and then select
History
. Select the desired list and then
press or to select the entry (Directory should be configured in advance.
Refer to
Directory on page 50 for more information).
Press , or the
Send
soft key to dial out.
- Press the
Directory
soft key, and then select
Remote Phone Book
. Select the desired
group and search for the contact (Directory should be configured in advance. Refer to
Directory on page 50 and Remote Phone Book on page 63 for more information).
Press , or the
Send
soft key to dial out.
- If
Allow Trans Exist Call
(refer to Allow Trans Exist Call on page 125 ) is enabled, you
can select the
New Call
and repeat steps mentioned above to complete transfer.
3.
Press or the
Transfer
soft key to complete the transfer when receiving ringback.
If you are using a handset, the transfer can be completed by hanging up the handset.
Attended Transfer
Before performing an attended transfer (except you use dial number method), make sure that
the transfer mode on DSS key is configured as
New Call
or
Attended Transfer
. For more
information on how to configure it, refer to Configuring Transfer Mode on DSS Key on page
151 .
To perform an attended transfer:
1.
Press or the
Transfer
soft key during a call.
2.
Do one of the following:
-
Enter the number you want to transfer the call to.
Press or to dial out.
-
Press the
Directory
soft key, and then select
Local Directory
. Select the desired
group and search for the contact (Directory should be configured in advance. Refer to
Directory on page 50 for more information).
Press , or the
Send
soft key to dial out.
-
Press the
Directory
soft key, and then select
History
. Select the desired list and then
press or to select the entry (Directory should be configured in advance.
Refer to
Directory on page 50 for more information).
Press , or the
Send
soft key to dial out.
-
Press the
Directory
soft key, and then select
Remote Phone Book
. Select the desired
group and search for the contact (Directory should be configured in advance. Refer to
Directory on page 50 and Remote Phone Book on page 63 for more information).
https://arttel.ru/
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g