Advanced Phone Features
151
3.
Enter the desired pickup code in the
Directed Call Pickup Code
field.
4.
Click
Confirm
to accept the change.
Configuring Transfer Mode on DSS Key
When there is an active call on the IP phone, you can handle the active call differently using a
BLF key. The phone behavior depends on the configuration of transfer mode via Dsskey with the
BLF key.
To configure the transfer mode on DSS key via web user interface:
1.
Click on
Features
->
Transfer
.
2.
Select the desired transfer mode from the pull-down list of
Transfer Mode via Dsskey
.
If you select
Blind Transfer
, press the BLF key to blind transfer the call to the
monitored user.
If you select
Attended Transfer
, press the BLF key to dial out the monitored phone
number and then perform an attended or a semi-attended transfer.
If you select
New Call
, press the BLF key to place a new call to the monitored user.