manualshive.com logo in svg

Yealink SIP-T23G, Quick Start Manual, Page: 3 / 8

Share
Download
Yealink SIP-T23G Quick Start Manual Download Page 3

2

Note: 

The headset should be purchased separately.

Startup

3. Connect the network and power, as shown below :

  You have two options for network and power connections. Your system administrator will advise you which one to use.

2. Connect the handset and optional headset, as shown below:

After the IP phone is connected to the network and  
supplied with power, it automatically begins the
initialization process. After startup, the phone is ready
for use. You can configure the phone via phone user 
interface or web user interfafce.

 Welcome

Initializing... please wait 

Note: 

The IP phone should be used with Yealink original power adapter (5V/600mA) only. The use of the 

          third-party power adapter may cause the damage to the phone. If you are connecting a PC to your phone, 

          we recommend that you use the Ethernet cable provided by Yealink. 

          If inline power (PoE) is provided, you do not need to connect the power adapter. Make sure the hub/switch 

          is PoE-compliant.

AC Power Option

A

B

PoE ( Power over 

Ethernet ) Option

Power Adapter

     (DC 5V)

IEEE 802.3af compliant

      PoE Hub/Switch

PC Connection

    (Optional)

PC

PC Connection

    (Optional)

PC

Summary of Contents for SIP-T23G









Reviews:

No comments