Configuring Advanced Features
717
Parameters
Permitted Values
Default
Account->Advanced->RPort
Phone User Interface:
None
To configure Rport feature via web user interface:
1.
Click on Account->Advanced.
2.
Select the desired account from the pull-down list of Account.
3.
Select the desired value from the pull-down list of RPort.
4.
Click Confirm to accept the change.
The Real-time Transport Protocol (RTP) is a network protocol for delivering audio and
video over IP networks. The UDP port used for RTP streams is traditionally an
even-numbered port. For example, the default RTP min port on the IP phones is 11780.
The first voice patch sends RTP on port 11780. Additional calls would then use ports
11782, 11784, 11786, etc. up to the max port. It is not applicable to SIP VP-T49G IP
phones.
Procedure
RTP port can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure RTP port.
Parameters:
network.port.max_rtpport
network.port.min_rtpport
Local
Web User Interface
Configure RTP port.
Navigate to:
http://<phoneIPAddress>/serv
let?p=network-adv&q=load
Summary of Contents for SIP-T2 Series
