Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
158
Parameters
Permitted Values
Default
incoming call, dials an outgoing call or engages in a call.
0-Disabled
1-Enabled
Note: It is only applicable to SIP VP-T49G/SIP-T48G/T46G/T29G IP phones.
Web User Interface:
Settings->Call Display->Display Contact Photo
Phone User Interface:
None
phone_setting.called_party_info_display.enable
0 or 1
0
Description:
Enables or disables the IP phone to display the called account information when
receiving an incoming call.
0-Disabled
1-Enabled
Web User Interface:
Settings->Call Display->Display Called Party Information
Phone User Interface:
None
phone_setting.call_info_display_method
0, 1, 2, 3 or 4
0
Description:
Specifies the call information display method when the IP phone receives an
incoming call, dials an outgoing call or is during an active call.
0-Name+Number
1-Name
2-Name
3-Number
4-Full Contact Info (display name<sip:[email protected]>)
Web User Interface:
Settings->Call Display->Call Information Display Method
Phone User Interface:
None
Summary of Contents for SIP-T2 Series
