Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
28
2.
Select
Disabled
from the pull-down list of
PC Port Active
.
3.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
4.
Click
OK
to reboot the phone.
Web Server Type
Users can configure the user or administrator features of the phone via web user interface. Web
server type determines access protocol of the IP phone’s web user interface. IP phones support
both HTTP and HTTPS protocols for accessing the web user interface. This can be disabled when
it is not needed or when it poses a security threat. For more information on accessing the web
user interface, refer to
on page
HTTP is an application protocol that runs on top of the TCP/IP suite of protocols. HTTPS is a web
protocol that encrypts and decrypts user page requests as well as pages returned by the web
server. Both HTTP and HTTPS port numbers are configurable.
When you enable user to access web user interface of the IP phone using the HTTP/HTTPS
protocol (take HTTPS protocol for example):
Summary of Contents for SIP-T19 E2 T4 Series
