Yealink One Talk CP960, Manual

Page: 111 / 151

Advanced Features
107
Picking up a Remote Call by BLF List Key
When a monitored line receives an incoming call, you can pick up the incoming call by tapping the BLF List key. For
example, if the monitor user is not at his/her desk and someone rings his/her line, you can pick up the call simply by
tapping the flashing BLF List key.
Before You Begin
Check with your system administrator to find out if this feature is available on your phone.
Procedure
1. Tap the BLF List key to pick up the call for the monitored line directly.
Transferring a Call by BLF List Key
When there is already an active call on the IP phones, you can transfer the active call to the monitored user by tapping
the BLF List key.
The phone transfers (Blind Transfer or Attended Transfer) the active call differently depending on the Transfer Mode via
Dsskey feature configured by your system administrator.
Topics
Performing a Blind Transfer
Performing a Semi-attended/Attended Transfer
Performing a Blind Transfer
Before You Begin
Check with your system administrator to make sure that the Transfer Mode via Dsskey is set to Blind Transfer .
Procedure
1. During a call, tap More -> Dsskey .
2. Tap the BLF List key of the monitored user which you want to transfer this call to.
Performing a Semi-attended/Attended Transfer
Before You Begin
Check with your system administrator if the Transfer Mode via Dsskey is set to Attended Transfer .
Procedure
1. During a call, tap More -> Dsskey .
2. Tap the BLF List key of the monitored user which you want to transfer this call to. The phone will dial out the num-
ber of the monitored line.
3. Tap the BLF List key of the monitored user again to complete the transfer when the monitored user receives ring-
back or after the monitored user answers the call.
Retrieving a Call by a BLF List Key
You can use the BLF List key to retrieve a call which is parked to the monitored line.
Before You Begin