Yealink One Talk CP960, Administrator'S Manual

Page: 461 / 533

General Features
458
Parameter account.X.callerid_in_support_header.enable
<MAC>.cfg
Description
It enables or disables the callerid attribute to be carried in the Supported header of the INVITE mes-
sage.
Permitted
Values
0-Disabled
1-Enabled
Default 0
[1]
X is the account ID. For VP59/T58A, X=1-16; for CP960, X=1.
Return Code for Refused Call
You can define the return code and reason of the SIP response message for the refused call. The caller’s phone
LCD screen displays the reason according to the received return code. Available return codes and reasons are:
l
404 (Not Found)
l
480 (Temporarily Unavailable)
l
486 (Busy Here)
l
603 (Decline)
Topic
Return Code for Refused Call Configuration
Return Code for Refused Call Configuration
The following table lists the parameters you can use to configure the return code for the refused call.
Parameter features.normal_refuse_code <y0000000000xx>.cfg
Description
It configures a return code and reason of SIP response messages when the phone rejects an incom-
ing call. A specific reason is displayed on the caller’s phone screen.
Permitted
Values
404-Not Found
480-Temporarily Unavailable
486-Busy Here
600-Busy Everywhere
603-Decline
Default 486
Web UI Features > General Information > Return Code When Refuse
Return Code for Unanswered Call
You can define the return code and reason of the SIP response message for the unanswered call. The caller’s
phone LCD screen displays the reason according to the received return code. Available return codes and reasons
are:
l
404 (Not Found)
l
480 (Temporarily Unavailable)
l
486 (Busy Here)
l
603 (Decline)
This feature is not applicable to VP59 phones.
Topic