Advanced Features
429
Parameter features.intercom.headset_prior.enable
<y0000000000xx>.cfg
Description It configures the channel mode to use when receiving an incoming intercom call.
Permitted
Values
0-Speaker Mode
1-Headset Mode, it works only if you connect the headset to the IP phone and the headset mode is
activated for use.
Default
1
Supported
Devices
All phones except CP960
Parameter account.X.alert_info
[1]
<MAC>.cfg
Description
It configures the value of the Alert-Info header for intercom feature.
The value format likes: <sip:XXX (X can be any value)>; answer-after=0.
Note: If both Call-Info header (defined by the parameter "account.X.call_info") and Alert-Info header
are configured, the Call-Info header has a higher priority than the Alert-Info header.
Permitted
Values
String within 256 characters
Default
Blank
[1]
X is the account ID. For VP59/T58A, X=1-16; for CP960, X=1.
CSTA Control
User Agent Computer Supported Telecommunications Applications (uaCSTA) is explained in detail in
for SIP Phone User Agents (uaCSTA)
and
Services for Computer Supported Telecommunications Applications
The uaCSTA feature on the phone may be used for remote control of the phone from computer applications such as
PC softphone. You can use the application to control the phone to perform basic call operations. For example,
place a call, answer a call, end a call and transfer a call to another party.
Topic
CSTA Control Configuration
The following table lists the parameter you can use to configure CSTA control.
Parameter features.csta_control.enable
[1]
<y0000000000xx>.cfg
Description It enables or disables the CSTA feature.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Features > Remote Control > CSTA Control
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Action URL
Action URL allows the phones to interact with web server applications by sending an HTTP or HTTPS GET request.
Summary of Contents for One Talk CP960
Page 1: ......
