Phone Customization
201
Topic
Idle Clock Display Configuration
Idle Clock Display Configuration
The following table lists the parameter you can use to configure the idle clock display.
Parameter phone_setting.idle_clock_display.enable
<y0000000000xx>.cfg
Description It enables or disables the phone to display the idle clock.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
CP960
Call Display
By default, the phones present the contact information (including avatar and identity) when receiving an incoming
call, dialing an outgoing call or engaging in a call.
You can configure what contact information presents and how to display the contact information. If the contact exists
in the phone directory, the phone displays the saved contact name and number. If not, it will use the Calling Line
Identification Presentation (CLIP) or Connected Line Identification Presentation (COLP) to display the contact’s iden-
tity.
Topic
Call Display Configuration
The following table lists the parameters you can use to configure the call display.
Parameter phone_setting.contact_photo_display.enable
<y0000000000xx>.cfg
Description
It configures whether to display contact avatar when it receives an incoming call, dials an outgoing
call or engages in a call.
Permitted
Values
0-Never, do not display contact avatar no matter whether the contact avatar exists or not
1-Always, display the customized contact avatar if it exists; display the built-in avatar if the customized
contact avatar does not exist
Summary of Contents for One Talk CP960
Page 1: ......
