![background image](http://html1.mh-extra.com/html/yealink/meetingspace-vc800/meetingspace-vc800_user-manual_908622039.webp)
Getting Started
23
6.
Connect the DC48V port on the VC800 codec to an AC power outlet with the supplied
power adapter and power cord.
Note
Note
Connecting the Audio Device
If your video conferencing room is large, you can add extra expansion microphones to the
CP960 conference phone to expand the audio range.
For more information on connecting CPW90 to the CP960 conference phone, refer to
Registering CPW90 to the CP960 Conference Phone
If you do not need presentation, you can locate the
VC Hub/Phone
port on the VC800 codec,
and connect it to the
Internet
port on the CP960 conference phone using a 7.5m Ethernet cable
directly.
The VC800 video conferencing system should be used with Yealink original power adapter
(48V/0.7A) only. The use of the third-party power adapter may cause the damage to the system.
The cable and wire should be replaced at once if its skin is broken.
Summary of Contents for MeetingSpace VC800
