Yealink MeetingSpace VC500, Administrator'S Manual

Page: 86 / 281

Administrator’s Guide for Yealink VC800&VC500 Video Conferencing System
70
3.
Click
Confirm
to accept the change.
To configure H.323 tunneling via the remote control:
1.
Select
More
->
Setting
->
Advanced
(default password: 0000)->
H.323
.
2.
Check the
H.323 Tunneling
checkbox.
3.
Select
Save
, and then press to accept the change.
Configuring Video Conference Platform
You can log into the Yealink VC Cloud Management Service/Yealink Meeting
Server/StarLeaf/BlueJeans/Pexip/Mind/Custom platform using Yealink video conferencing
system.
Logging into Yealink VC Cloud Management Service
Yealink VC800/VC500 video conferencing systems support Yealink Cloud accounts. The cloud
enterprise administrator uses the Yealink VC Cloud management service to assign each user an
individual Yealink Cloud account. For more information, refer to
Yealink VC Cloud Management
Service Administrator Guide
.
You can log into the Yealink VC Cloud Management Service platform, and dial other Yealink
Cloud numbers to establish a conversation. If you want to place a call to a Yealink Cloud contact
who is in the same Yealink Cloud directory as you, you can enter the 9-digit Cloud number or
the extension (the last four Cloud number) to place a call. If you want to place a call to a Cloud
contact who is in different Yealink Cloud directory from you, you should enter the 9-digit Cloud
number to place a call.
Yealink VC Cloud Management Service platform parameters on the system are described below:
Parameter Description Configuration Method
Cloud Account
Enables or disables the Cloud feature.
Default:
Enabled
Note:
If it is disabled, the system
cannot log into the Yealink VC Cloud
Management Service Platform.
Remote Control
Web User Interface
Platform Type
Configures the platform type.

Yealink VC Cloud Management
Service

Yealink Meeting Server

StarLeaf

Zoom
Remote Control
Web User Interface