7
Head Office
If you deploy VC500 in the head office, at least one static public IP address is required in the head office to allow branch offices to
connect.
Option2
: To deploy the VC500 in an Intranet (behind the firewall), you must assign a static private IP address to the VC500. In the
meantime, do port mapping on the firewall for VC500.
Option1
: To deploy the VC500 on a public network, at least one static public IP address is required, you need to assign a static public IP
address to the VC500.
Configure a Static IP
It is recommended that you forward the web management port(443/TCP) to the public network, so that the head office can remotely
manage the branch office.
Port
Function
H.323 signal port
SIP
（
optional
）
Audio & Video media stream port
Protocol Type
UDP/TCP
TCP/UDP
TCP/UDP
50000-50499
5060-5061
1719-1720
Do one of the following to deploy VC500:
Configure Port Mapping
If the VC500 is deployed in an Intranet, and you want to solve the interconnection problem by port mapping, you must forward the
following ports to the public network on the firewall.
Port
Function
H.323 signal port
SIP
（
optional
）
Audio & Video media stream port
Web management port
（
optional
）
Protocol Type
UDP/TCP
5060
443
50000-50499
1719-1720
TCP/UDP
TCP/UDP
TCP
The following introduces how to configure a static IP address for the VC500.
For example: use the remote control to configure a static IPv4 address to your VC500.
Select
More
->
Setting
->
Advanced
(Default Admin Password:0000)->
Internet Configuration
.
Select
IPv4
from the pull-down list of
IP Mode
.
Press or to select
IPv4
, and then press .
Uncheck the
DHCP
checkbox
.
Enter the IP address, subnet mask, gateway and DNS information in corresponding fields.
Press or to select
Save
, and then press
to save the configuration.
The screen prompts [
Reboot now?
]. Select
OK
to reboot the
endpoint
.
.
.
.
.
.
.
.
