| Basic Settings |
44
Video Input Source
The system supports the video input sources both from the camera and the PC. You can change the input
source on your remote control.
•
Changing the Video Input Source When not in a Call
•
Changing the Video Input Source in a Call
Changing the Video Input Source When not in a Call
Before you begin
To use the PC input source, make sure that your system is connected to a PC.
Procedure
1.
Go to
More
>
Setting
>
Basic
>
Input Selection
.
The screen shows
Camera
,
PC
and
PC input
sources.
2.
Select the desired input source.
• If you select
PC
, the remote video image is displayed in large window, and the PC content is
displayed in small window (Picture-in-Picture mode).
• If you select
PC
, the PC content is displayed in large window, and other video images are
displayed in small window.
• If you select
Camera
, the remote video image is displayed in large window, and the local video
image is displayed in small window (Picture-in-Picture mode).
Changing the Video Input Source in a Call
Before you begin
If you want to change the video input source to PC, you need to connect the system to the PC.
Procedure
1.
In a call, press the OK key to open
Talk Menu
and go to
More
>
Input Choose
.
The monitor display
Camera
and
PC
as the input source.
2.
Select the desired input source.
You can see the video image displayed by the selected video input source.
Summary of Contents for MeetingEye 600
Page 1: ......