manualshive.com logo in svg

Yealink MeetingEye 400, Administrator'S Manual, Page: 29 / 278

Share
Download
Yealink MeetingEye 400 Administrator'S Manual Download Page 29

 | Getting Started | 

29

Hardware of VCC22 Video Conferencing Camera

VCC22 is a video conferencing camera for VC880/VC800/PVT980. It adopts 12x optical zoom lens,
supports 1080P/60 frame full HD video, has OSMO and PTZ function, and possesses professional video
quality and environmental adaptability. You can connect up to 9 VCC22 video conferencing cameras to the
VC880/PVT980 video conferencing system, and 8 to VC800 video conferencing system.

The VCC22 camera can be panned (± 100 degrees range), tilted (± 30 degrees range) and supports 12 x
optical zoom, white balance and automatic gain.

•

Front Panel of VCC22 Video Conferencing Camera

•

Rear Panel of VCC22 Video Conferencing Camera

Front Panel of VCC22 Video Conferencing Camera

The LED indicator in front of the camera indicates different camera status.

Related information

LED Instructions of VCC22 Video Conferencing Camera

Summary of Contents for MeetingEye 400























































































































































































































































































Reviews:

No comments