Yealink CP960 Skype for Business User Manual Download Page 127

Page: 127 / 174

Basic Call Features

118



Tap the

Dismiss

soft key to permanently remove the reminder from the screen and stop

all future reminders for the Skype conference



If you receive a Skype conference, tap

Join

to join the Skype conference.

Note

Joining Skype Conferences from the Calendar

You can join the Skype conferences from calendar in following three ways:



Joining a Skype conference from

a conference reminder

(Once joined, presenter and

attendee will be muted automatically, organizer will not be muted).



Joining a Skype conference from Schedule view

(Once joined, presenter and attendee

will be muted automatically, organizer will not be muted).



Dialing the conference dial-in number to join a Skype conference

(Once joined,

presenter, attendee and organizer will not be muted).

Note

Joining a Skype Conference from a Conference Reminder

If you enable the calendar reminder feature, you can join the Skype conferences from calendar
reminder.

When the organizer sets up a conference in Outlook and enables

Mute all attendees

feature,

all conference participants will be muted automatically once join the Skype conferences in
above ways.

When receives a Skype conference reminder during a call, you can tap

Join

to join the Skype

conference directly. Current call will be held and you can resume it after the Skype conference.

Summary of Contents for CP960 Skype for Business















































































































































































Search results

Summary of Contents for CP960 Skype for Business

Reviews:

Related manuals for CP960 Skype for Business

Brands by name

Popular brands

Yealink CP960 Skype for Business, User Manual

Search results

Summary of Contents for CP960 Skype for Business

Reviews:

Related manuals for CP960 Skype for Business

Brands by name

Popular brands