Yealink_CP930W_200225_QG
Page 4
TelNet Worldwide, Inc. • telnetww.com • (800) 974-4800
TelNet Worldwide, Inc. • telnetww.com
Yealink CP930W
Conference Phone
Quick Guide
Do Not Disturb
•
To enable do not disturb, press DND. A DND icon will
appear at top of LCD display
•
To disable DND, press DND again
•
When DND is enabled, incoming calls will not ring the
conference phone. Incoming calls will go directly to
voicemail or receive a busy signal if voicemail is not
enabled.
Call History
•
Press History to view call history, followed by OK. Use the
up/down navigation arrows to view additional calls.
Note:
A notification of any missed calls is displayed on
the screen. Press View to see any missed calls.
Directory
•
Press Directory followed by Network Directory, then All
Contacts to view phone numbers for your organization.
Use the Up/Down navigation arrows to locate and
highlight the desired contact. Press Send to call the
desired contact.
•
Press End Call to end a call that is actively being dialed /
ringing
Park (if enabled)
•
While on an active call, press Hold followed by New
Call. Enter #58 followed by Send. The call will be parked
against an available extension such as 101, 102, etc. The
system will automatically announce the park extension to
the person that parked the call.
Unpark (if enabled)
•
Using the keypad, dial *88 and enter the extension
that the call was parked against. For example, park
extensions are typically 101, 102, 103, etc. Press Send to
retrieve the parked call.
Multicast Paging (if enabled)
•
Press Menu, Features, then use Up/Down navigation
arrows to select Paging List followed by OK. Wait for the
tone and begin speaking. The message is broadcast to
all phones connected to LAN with paging enabled. The
page is preceded by a beep tone. Press End Call to end
the page.
•
The conference phone will automatically receive
broadcast pages from other phones on LAN that are
setup with multicast paging
Power
•
To turn phone on, press and hold the red phone button or
place conference phone in the charging cradle
•
To turn phone off when phone is not in charging cradle,
press and hold the red phone button, followed by Yes
