Yazoo/Kees ZELKH6125, Operator'S Manual

Page: 43 / 68

2
1
3
maINTeNaNCe
43
Pump Belt
Replacing pump belt
Park the mower on a level surface. Engage the
parking brake.
Belt removal
Remove the deck belt (see Deck Belt Removal 1.
in this section of the manual).
Remove clutch stop to access the belt. 2.
Disconnect clutch wire. 3.
Create slack in the belt by removing the spring 4.
on the pump idler arm.
The belt should now be able to be removed 5.
from the engine pulley and pump pulleys.
Belt installation
Wrap the belt around the pulley 1.
Route the belt around the inside of the idler 2.
pulley.
Wrap the belt around the engine pulley. 3.
Reattach the spring on the pump idler arm. 4.
Reconnect clutch wire. 5.
Replace and secure clutch stop. 6.
Reinstall the deck belt. (see Deck Belt Removal 7.
in this section of the manual).
V-belts
Check every 100 hours of operation. Check for severe
cracking and large nicks.
NoTE: The belt will show some small cracks in normal
operation.
8054-003
Electric clutch 1.
Idler spring 2.
Clutch stop 3.
Pump belt removal