background image

2

Congratulations

 on the purchase of your 

YAZOO/KEES

 mower. This manual has been prepared

for the owners and operators of the models called out on the front cover of this manual. Read,
understand and follow the safety and operating instructions.

Continuous dedication to improve our products require that specifications and design are
subject to change without notice.

! WARNING

Failure to follow cautious operating practices can result in serious injury to the operator or other per-
sons.  The owner must understand these instructions, and must allow only trained persons who un-
derstand these instructions to operate the mower.  Each person operating the mower must be of
sound mind and body and must not be under the influence of any mind altering substance.

! CAUTION

1. Keep all shields, guards and safety devices in place and in proper working condition.
2. Stop engine and remove spark plug wires or remove key before adjusting, servicing, or performing
maintenance.

WARNING: Engine exhaust, some of it’s constituents, and certain vehicle components

contain or emit chemicals known to the State of California to cause cancer and birth defects

or other reproductive harm.

WARNING: Battery posts, terminals and related accessories contain lead and lead com-

pounds, chemicals known to the State of California to cause cancer and

birth defects or other reproductive harm. Wash hands after handling.

©

2003 Yazoo/Kees Power Equipment.  All right reserved.

Beatrice, NE. Printed U.S.A.

GOOD SERVICE

Yazoo/Kees products are sold all over the world and only in specialized retail stores with complete
service. This ensures that you as a customer receive only the best support and service. Before the
product is delivered, the machine has, for example, been inspected and adjusted by your retailer,
see the certificate in the Service Journal in this operator’s manual.

When you need spare parts or support in service questions, warranty issues, etc., please consult
the following professional:

This Operator’s Manual belongs to the
machine with manufacturing number:

Engine

Transmission

Summary of Contents for ZCBI48180



































Reviews: