Yazoo/Kees 966509601, Operator'S Manual

Page: 22 / 68

1
2
3
CONTROls
22
Cutting Height Pedals
The cutting height pedals release the deck lift to allow
setting the desired deck height. Apply pressure to the
lift pedal and rotate foot to also apply pressure to the
release pedal, unlocking the deck lift.
For transport, push the lift pedal fully forward until the
deck lift latches in the transport (highest) position.
8061-041
1. Detent Pin
2. Transport latch
3. Foot Pedal
The mower deck’s lifting lever
8066-014
Choke control
Choke Control
The choke control is used for cold starts to provide
the engine with a richer fuel mixture.
For cold starts the control should be pulled out to its
extent.
As the engine reaches operating temperature,
gradually push the choke in (normal operating choke
position).
Fuses
Fuses are located on the right hand side of the
machine. They are accessed by tilting the seat
forward. Fuses are flat pin fuses type as used in
automobiles.
There are three fuses with ratings and functions:
20 A, Primary fuse. 1.
7.5 A, Mower deck coupling. 2.
10 A, Accessories 3.
8011-420
Fuses