—[8]—
VII
Common Troubleshooting
1. iPod Car Adapter doesn't work after installation.
Please check whether the wire harness is correctly connected. And if
there is GND wire(for some car models), please check whether it connects
well with metal parts of car radio.
2. What happens when I receive a call and my iPhone is connected?
The sound from the stereo will automatically mute and the phones ring
will be heard over the factory radio speakers. When the call answered on
the iPhone, it will enter privacy mode and the iPhone operates as it
normally does during a call. No sound will come from the stereo system.
Once a call is completed the sound returns to the factory radio.
4. When auxiliary device is connected via AUX IN slot, I can still hear
music sound from iPod? how to do with this?
Please disconnect the ipod from adapter or stop the ipod by operate the
iPod's keypad before you use the AUX IN, as iPod playback will not
automatically stop.
5. When playing tracks from AUX device, it is running quite well, but
either tracks or CD folders cannot be switched, what can I do?
AUX is an external audio input, you can only adjust the volume via head
unit when in AUX playback status. It is normal that you cannot switch
used to seek within a single song too. but the time on the radio will not
accurately reflect the position with a given song.
7.Switch Between Yatour and Existing CD Changer
For VAG vehicles, Parallel Harness (without MP3/CDC switch) is
provided, when you are using iPod adapter and want to switch to existing
CD Changer, press FM/AM or other audio playback mode button, then
press CD button to switch to existing CD Changer. And vice versa.
MP3/CDC Switch Cable is provided for existing CD Changer on vehicles
except for VAG cars. Power off your radio or vehicle and switch between
MP3(iPod Car Adapter) and CDC(Original CD changer). For some
vehicles, you may need to restart the radio for once after operation on
MP3/CDC Switch.
