—[7]—
Hold radio fast forward button
【>>】
for 2 seconds during conversation, and the
call transfers from Bluetooth hands free to mobile phone private status. Hold radio
button
【>>】
for 2 seconds again, the call turns back to Bluetooth hands free again.
If users already have a remote control unit, during conversation, users can hold the
hang up button for 2 seconds and the call transfers from Bluetooth hands free to
private mobile phone conversation.
3.5 Private Phone Call
1. Only when Bluetooth hands free is under CD1 mode, Pressing CD02 button or
Disc+ button during conversation will end a call .
Do not press radio buttons other than
【>>】
button and source buttons once the
call is coming in and till the conversation is over. Otherwise, the former A2DP music
playback may be disturbed or other uncertain status will appear.
2. If there is another call coming during conversation of same mobile phone, the
call tone will come out from car speakers(If the mobile phone and operator supports
), user can press radio button
【>>】
to hang up current call and answer the coming
call.
3. If there are two mobile phones both connected with BTA at same time, when the
mobile A is under conversation and a call coming from mobile B, user can press
radio button
【>>】
to hang up current call and answer the coming call.
3.6 Other Functions of Bluetooth Hands free
3.7 Streaming Mobilephone Music into Stereo (A2DP)
mobile phone before, the former operation will automatically switch the car stereo to
BTA Bluetooth hands free phone call. But some mobile phones may need manually
switching to Bluetooth phone call status.
3. To end a call during conversation, press radio fast forward button
【>>】,
then
the call is over. User can also turn to FM/AM modes etc. to end a call automatically.
4. Under non-BTA mode, it is not able to reject a coming call via car radio button.
If necessary, it is advised to set automatically rejecting a call if the call is not
answered for some time on mobile phone. Or directly reject the call on mobile
phone. If users already have a remote control unit, under this status, users can hold
the hang up button on remote control unit to reject a call.
Make sure the mobile phone has already been connected with BTA via Bluetooth,
the mobile phone must support Bluetooth music playback function (A2DP) and must
be under Bluetooth music transfer mode (Refers to mobile phone user manual).
During A2DP music playback, BTA must be under CD1 mode. When pressing CD02
or Disc+ buttons, BTA will automatically stop A2DP music playback, and now BTA’s
AUX input is valid. Pressing CD01 or Disc- buttons will automatically resume A2DP
music playback.
