YATO YT-82274, Original Instructions Manual

Page: 11 / 84

11
O R I G I N A L I N S T R U C T I O N S
GB
CHARACTERISTICS OF TOOL
Jigsaw is a power tool designed for cutting wood surfaces and surfaces made of wood-based materials, plates made of polyethyl-
ene or polypropylene and soft metals, by using the appropriately selected blades to the type of material. The tool allows for easy
cutting of the workpiece surfaces with possibility to adjust the cutting angle. Correct, reliable, and safe operation of the device is
dependent on its proper use, therefore:
Prior to working with the tool, you should read all the instruction and keep it around.
For any injury and damage, which are resulting from failure to comply with its designation, lack of compliance with the safety
regulations and instructions of this manual, the supplier is not responsible. The tool misuse causes also the loss of user’s rights
to the guarantee, as well as warranty.
EQUIPMENT
There should be in the factory packaging:
- jigsaw
- blade cover
- blade
- wrench
TECHNICAL PARAMETERS
Parameter Unit Value
Catalog number YT-82274
Mains voltage [V~] 220 - 240
Frequency [Hz] 50
Rated power [W] 450
Rotations [min -1 ] 510 - 3100
Insulation class II
Cutting thickness max.
- wood
[mm] 65
- polyethylene / polypropylene [mm] 6
- soft metals [mm] 6
Weight [kg] 2
Noise level:
- pressure (iddle run)
[dB(A)] 86,0 ± 3,0
- power (iddle run) [dB(A)] 97,0 ± 3,0
Vibrations (wood / metal cutting) [m/s
2
] 8,27 ± 1,5 / 10,65 ± 1,5
Degree of protection IP20
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and speci fi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term “power tool” used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed power tools. An unmodi fi ed plug that fi ts the outlet reduces the risk of electric shock.
Avoid contact with earthed surfaces such as pipes, radiators and coolers. Grounding the body increases the risk of electric shock.
Do not expose power tools to contact with atmospheric precipitation or moisture. Water and moisture that gets inside the
power tool increases the risk of electric shock.