3
Y-Q5
CONTACTLESS TEMPERATURE SCANNING KIOSK
Quickstart Guide
Included Components
Display
Pedestal
Base
All Other Included Equipment
Allen wrench (2) ½ inch screws ¼ inch screws Electrical Cord
1) Select a location for your Yates Protect Q5
facial recognition and thermal scanner
A good location will be near an entrance and
an electrical outlet, with enough space for a
socially-distanced line to form. Please avoid
direct sunlight on the display.
2) Attach Base to Pedestal
Use appropriate Allen wrench and install the
½ inch screws from the bottom of the base
into the pedestal through the holes in the
base (see A on right for location)
3) Install Display
Thread Display cords through square
Pedestal cover (B) and washer (C) as
pictured. Connect ethernet and power cables
coming out of the bottom of Display (D) with
ethernet and power cables in Pedestal (E)
Use included Allen wrench to secure Display
to Pedestal with ½ inch screws
4) Plug included electrical cord at the bottom
of the Pedestal (D) into an outlet and wait one
minute
Your Yates Protect Q5 is ready to start
scanning
A
E
B
D
C
F
