Yates MD-880 User Manual Download Page 4

Reassembly

Dust Bin Care

Separating the following parts:

The core-filter and mesh filter cover.
    Follow the direction of arrow in above  

    diagram to open it.

  Before cleaning the filters ensure that the power is off and the plug disconnected.   

  The installed vacuum cleaner filters should be regularly cleaned, otherwise 

  performance will be diminished.

  DO NOT clean with strong alkaline detergents.

It is recommended to open the transparent dust bucket 

over a garbage can as the contents may disperse.

The core-filter and mesh filter cover and transparent 

dust bucket should be cleared daily. Water can be used 

for cleaning and a soft-hair brush for light wiping. The 

core-filter and mesh filter cover should be air-dried only 

(do not expose to heat or put in dryer) and replace only 

when completely dry.

Step second

Step forth

Step third

Turn right indicator line.
    Follow the direction of arrow in above diagram 

    to open it.

Step first

Trouble-shooting

CAUTION!

Should any of the below occur, it indicates that the core-filter and mesh filter cover are not 

properly installed. Reinstall both the core-filter and mesh filter cover to rule out malfunctions.

Example 1 

Mesh filter cover installed only (Core-filter not in place).

Example 2 

Core-filter installed only (Mesh filter cover not in place).

Example 3 

The mesh filter cover overflows its edge and interferes with the dust collection bin latch 

grooves.

Disposal :

    

       The machine, rechargeable batteries, accessories and packaging should be 

       sorted for environmental-friendly recycling.

       Do not dispose of power tools and rechargeable batteries into ho usehold waste!

CAUTION!

3

1

2

Core-filter and mesh filter cover must be completely dry before replacement. Absolutely do NOT 
operate appliance with wet filter.

Before using the appliance the core-filter and mesh filter cover must be properly installed.

When installing the core-filter align with the protruding circular edge and press down evenly, 
ensure that it is secure and not loose.

When installing the mesh filter cover, insert evenly over the core-filter.

When installing the dust collection bin, line up with the alignment mark until it locks firmly in place.

CAUTION!

1. Core-filter (HEPA)

2. Mesh Filter-cover

3. Transparent dust bucket

    

    Install in the direction of arrow

    in above diagram.

5

6

Reviews: