YAT LCS31010, Operator'S Manual

Page: 3 / 12

3
3
Combination Hex Key/Screwdriver
Loosen the guide bar screw counterclockwise with the hex key end of
the tool. (2)
Tighten the chain tensioner clockwise with the screwdriver end
of the tool. (8)
Tighten the guide bar screw clockwise with the hex key end of the
tool, but leave the bar free to move for tension adjustment. 9
( )
Remove all slack from the chain by turning the chain tensioner
clockwise with the screwdriver end of the tool until the chain seats
snugly against the bar with the drive links in the bar groove. 10
( )
Tighten the guide bar screw clockwise with the hex key end of the
tool.(11)
Remove the combination hex key/screwdriver from the saw. (1)
Replace
INSTALLING/REPLACING THE GUIDE BAR AND CHAIN