YAT 3276004981721, Assembly, Use, Maintenance Manual

Page: 46 / 57

45
EN
SAFETY INSTRUCTIONS
a) Have your garden power tool
serviced by a qualified repair
person using only identical
replacement parts. This will ensure
that the safety of the garden power
tool is maintained.
b) If the supply cord is damaged,
it must be replaced by the
manufacturer or its service agent
in order to avoid a hazard.
c) If the carbon brushes need to
be replaced, have this done by a
qualified repair person (always
replace the two brushes at the
same time).
Vibration and noise reduction
To reduce the impact of noise and
vibration emission, limit the operating
time, use low-vibration and low-noise
operating modes, and wear personal
protective equipment.
Take the following points into account
to minimise the vibration and noise
exposure risks:
1. Only use the product as intended by
its design and these instructions.
2. Ensure that the product is in good
condition and well maintained.
3. Use correct attachments for the
product and ensure they are in
good condition.
4. Keep tight grip on the handles/
grip surface.
5. Maintain this product in
accordance with these instructions
and keep it well lubricated (where
appropriate).
6. Plan your work schedule to spread
any high vibration tool use across a
longer period of time.
Emergency
Familiarise yourself with the use
of this product by means of this
instruction manual. Memorise the
safety directions and follow them
scrupulously. This will help to prevent
risks and hazards.
1. Always be alert when using this
product, so that you can recognise
and handle risks early.Fast
intervention can prevent serious
injury and damage to property.
2. Switch off and disconnect from
the power supply if there are
malfunctions.
Have the product checked by a
qualified professional and repaired, if
necessary, before you operate it again.
Residual risks
Even if you are operating this product
in accordance with all the safety
requirements, potential risks of injury