If the selected image is not correct for your panel, an error massage
will appear. If the image is correct for your panel, in the following
message the current installed image version and the new selected
image version will be listed.
1.
Click on [Update Image] to execute the update. This can take a
few seconds.
2.
In the following window click on [Finish] to end the update.
ð
Then the display gets dark.
3.
Switch the power supply off the panel off and on.
ð
After the restart the calibration window is opened.
4.
Re-calibrate the panel as described. After calibration tap any-
where on the screen.
ð
The calibration window will be closed.
5.
Via
‘Start
è
Settings
è
Control Panel’
start the program
AutoR-
unMaker
Chapter 3.4 ‘Installation Movicon and Startup-Man-
With [Autostart] you define which runtime and which project will be
started automatically together with the panel startup.
With [...] under "Runtime path" res. "Project path" all existing runtimes
res. projects on the panel and the storage media are listed.
Under "Delay Time" you can adjust a delay time > 0 by using the but-
tons [+] and [-]. 5 seconds are default.
Via "Rotation" the orientation of the panel can be changed.
Autostart
VIPA HMI
Deployment under Windows CE 6.0 Core
Commissioning> VIPA Startup-Manager
HB160 | TP-ECO | 62H-MGC0 | GB | 16-02
30
