Configuration MPI/DP-Slave
n
To configure the MPI/DP interface on the Touch Panel start via
"Control Panel" the tool "MPI/DP Slave Configuration".
n
Default: MPI - Adress 1
n
The following settings are only required if you not communicate
via Movicon.
Configuration DP slave
n
Via mode the interface could be set up on "DP Slave".
It is possible to set up the DP slave with the tool via soft-
ware if the hardware of the Touch Panel does not support
this. In this case MPI does not work either.
To remain the settings permanently, they have to be saved
with KuK Tools [Store]. To activate the changes the
Touch Panel has to be restarted after the configuration.
VIPA HMI Touch Panel
Deployment Touch Panel
Commissioning > VIPA Startup-Manager
HB160 | TP | 62K-JEE0 | GB | 14-38
31