YASKAWA ELECTRIC
TOEP C710606 09B YASKAWA AC Drive V1000 Installation & Start-Up Manual
97
4.3 The Drive and Programming Modes
Star
t-Up Pro
gra
m
m
ing &
Ope
ratio
n
4
4.3
The Drive and Programming Modes
The drive functions are divided into two main groups accessible via the Digital LED
Operator:
Drive Mode:
The Drive mode allows motor operation and parameter monitoring. Parameter
settings cannot be changed when accessing functions in the Drive Mode (
Programming Mode:
The Programming Mode allows access to setup/adjust, verify
parameters and Auto-Tuning. The drive prohibits changes in motor operation such as start/
stop when the Digital LED Operator is accessing a function in the Programming Mode.
illustrates the different functions visible as the “Up arrow” is scrolled immediately
after powering up the drive.
Note:
When b1-08 (Run Command Selection while in Programming Mode) is set to 1 (enabled), the
drive can run even if the mode is switched to the programming mode. When setting b1-08 to 0
(disabled), the mode cannot be switched to the programming mode while the drive is running.
Table 4.3 Summary ofModes
Mode Group
Description
Key Press LED Digital Operator Display
Drive Mode Functions (Motor
operation
and monitoring)
Frequency Reference Display
(Initial power-up state)
Forward/Reverse
Output Frequency Display
Output Current Display
Output Voltage Reference
Monitor Display
Programming Mode
Functions
(Changing parameters)
Verify Function
Setup Group Parameters
All Parameters
Auto-Tuning
Summary of Contents for V1000 Series
Page 2: ...2 YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation Start Up Manual...
Page 464: ...464 YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation Start Up Manual...
Page 465: ...YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation Start Up Manual 465...